llf

My music server (Aurender N10) will be in an area that does not have a wired connection I'm not sure if it offers wireless operation, or not. If not, what is the best way to get quality internet to the device?

Thank you. Problem solved. I noticed my software would stream to the IRIS AFTER I turned off the DAC for the night. I then fired up the DAC again and the software continued to stream with both devices in the chain.

I installed and uninstalled driver many times to get things going. My final attempt had me following installation instructions to a T. I would either get A) nothing B)1 to 5 seconds of play or C) Unable to change to Integer Mode message. Here's my last log Audirvana 3.5.43 SIGNAL PROCESSING: Polarity Inversion: Globally: OFF Per track: ON Effects plugins NOT ACTIVE UPSAMPLING: SoX not in use SoX filter parameters Bandwidth at 0dB = 99.5 Filter max length = 30000 Anti-aliasing = 100 Phase = 66 AUDIO VOLUME: Max allowed volume: 100 Replay Gain: None SW volume control: OFF LIBRARY SETTINGS: Sync list: 1 folders AUTO: F:\ Library database path: F:\AudirvanaPlusDatabaseV2.sqlite ACTIVE STREAMING SERVICES TIDAL: Connected as HIFI =================== AUDIO DEVICE ======================== Max. memory for audio buffers: 6048MB Local Audio Engine:ASIO 2 driver version 1110 Preferred device: Speakers (DENAFRIPS USB DAC) Model UID:Speakers (DENAFRIPS USB DAC) UID:\\?\SWD#MMDEVAPI#{0.0.0.00000000}.{8de3344a-a95d-4061-a82e-ba9015968de7}#{e6327cad-dcec-4949-ae8a-991e976a79d2} Currently playing in Integer Mode: Device: 2ch 32bits Integer, 8 bytes per frame 44.1kHz Active Sample Rate: 44.1kHz Bridge settings: Sample rate limitation: none Sample rate switching latency: none Limit bitdepth to 24bit: OFF Mute during sample rate change: OFF Selected device: Local audio device Vinshine DENAFRIPS USB DAC Manufacturer: Model UID:Vinshine DENAFRIPS USB DAC UID:Vinshine DENAFRIPS USB DAC 17 available sample rates up to 45158400Hz 44100 48000 88200 96000 176400 192000 352800 384000 705600 768000 1411200 1536000 2822400 5644800 11289600 22579200 45158400 Volume Control Physical: No Virtual: No MQA capability Auto-detect MQA devices: No Not a MQA device, user set to not MQA DSD capability: Raw DSD (MSB) Device audio channels Preferred stereo channels L:0 R:1 Channel bitmap: Ox3, layout: Channel 0 mapped to 0 Channel 1 mapped to 1 Audio channels in use Number of channels: 2 Use as stereo device only: No Simple stereo device: Yes 1 output streams: Number of active channels: 2, in 1 stream(s) Channel #0 :Stream 0 channel 0 Channel #1 :Stream 0 channel 1 2 ch Integer PCM 32bit little endian 44.1kHz 2 ch Integer PCM 32bit little endian 48kHz 2 ch Integer PCM 32bit little endian 88.2kHz 2 ch Integer PCM 32bit little endian 96kHz 2 ch Integer PCM 32bit little endian 176.4kHz 2 ch Integer PCM 32bit little endian 192kHz 2 ch Integer PCM 32bit little endian 352.8kHz 2 ch Integer PCM 32bit little endian 384kHz 2 ch Integer PCM 32bit little endian 705.6kHz 2 ch Integer PCM 32bit little endian 768kHz 2 ch Integer PCM 32bit little endian 1411.2kHz 2 ch Integer PCM 32bit little endian 1536kHz 2 ch DSD 8bit big endian in 8bit chunk 2822.4kHz 2 ch DSD 8bit big endian in 8bit chunk 5644.8kHz 2 ch DSD 8bit big endian in 8bit chunk 11289.6kHz 2 ch DSD 8bit big endian in 8bit chunk 22579.2kHz 2 ch DSD 8bit big endian in 8bit chunk 45158.4kHz Local devices found : 1 Device #0: Vinshine DENAFRIPS USB DAC Manufacturer: Model UID: Vinshine DENAFRIPS USB DAC UID: Vinshine DENAFRIPS USB DAC UPnP devices found : 0

Nevermind… I disabled the Realtek High Definition Audio driver momentarily and when I returned to the XMOS USB Audio driver, voila, it worked.

I have installed and selected XMOS USB Audio driver. Sound comes out of computer speakers, not headphones. My perusal of software options has net nothing of use.

I am trying to use the bel canto LightLink to connect from computer to my bel canto DAC without success. Doesn't work from my phone, either. Both PC and phone will output signal to a DAC/AMP without a hitch using USB cable. DAC is set to ST as input selection. Have checked all of the cable connections and amp's input selection setting. What could be going wrong?

I am trying to use the bel canto LightLink to connect from computer to my bel canto DAC without success. Doesn't work with my phone, either. Both PC and phone will output signal to a DAC/AMP without a hitch using USB cable. DAC is set to ST as input selection. Have checked all of the cable connections and amp's input selection setting. What could be going wrong?

I returned them to Amazon.

$155 each

I picked up some Cat 6 cabling and could not get a connection from my ethernet switch. Things worked when I plugged the two cables into my wireless router. Any wiring diagrams on these pages?

I have fiber optic internet. I'm not sure where that ends and where the old school connection starts.

…when I have close to 30' of cabling coming from my service provider (USInternet) to begin with?

Patriot

I bought a second 512 GB stick. I'll maybe try that one to see if I get the same result. I have to wait a considerable amount of time for 200 or so GBs to transfer from my internal HD.

https://www.amazon.com/gp/product/B01A6YDZ3I/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1 The error message I receive goes away to fast for me to capture it exactly. Something about the last USB device I used failed and to run the scan and repair utility. It has happened twice now. I have a 512 GB HD on its way. I will rip my files to this medium and then hopefully transfer to the memory stick for use in my oppo Sonica DAC and SonicTransporter at two separate locations.