ambre

I have in use the according range extender of Netgear by means of Wifi6 protocal.Not wired. Your question if ......understoond well is that you connect a separate wifi network by means of wired wifi transmitter? That's possible but difficult to arrange. Please the 200 pages manual of the Nighthawk!!! But the Wifi of the Nigthhawk itself is very good and latest 6ghz standard transmitting. Really fast.

Hi Adrian, First impression. EtherRegen / Adark Masterclock feeded by 2x Farads and 4x modified Bonn switches with LPS (4x) playing on Auralic Vega G2.1 and Cambridge Edges W and Kef R3 The Nigthawk and Adark High current LPS are indeed improving (to my ears) the SQ in terms of improved separation and even better stereo depth image. Will even be better after a longer period of burning in! How can ???🤫😳🤓 Thanks for thids ... nice toy for ..,,Audio-boys. Very best regards, Andreas

Bedankt/ Thanks

Hi, i have also ordered yesterday the router and the PS of Adark too. Do you use it wired and / or wireless in your set-up? Regards, Andreas

Heb je deze kabel nog?

Put the Farad and after that the Etherregen on power due to the fact that the Faradds use a supercapacitor which takes time to fully load ( see manual Farad) will solve your problem. To put everything at same time by Furman (? Don’t know this device maybe it needs also time to come max power/ load) lead to mismatches IMO Ps if I switch to early by inserting dc powercable in ER ….I have similar problems.

Dear Cris, Could you please add a new button for annoying postings …that’s missing. This seems to be a never ending discussion …debate without any kind of news.

HI Andreas, Please look at heir website. Level 2 sound much better ...but avoid the Silver only needed if you need pepper& salt for your audio?

Level 2 copper is much better

Imo removing Mini Circuits filter betters overall sound on my 50 Ohm Afterdark. At first instance I was delighted but …after a while I was missing some aspects. High focus on mid high and really airy but cymbals wasn’t that crispy as remembered and mid bass lacks also and deep low bass isn’t was earlier( especially organ music) as low as it should / can be. For sale within Europe for €15,00 ex postage 🥸

Hi Adrian. What your present experiences concerning the additional filters as defined by John Swenson for the 50 and 75 Ohm Sin wave clocks ? At first instance sounded good/ better / differently. as before ..,,but I was informed that for better Quality Adark clocks this could be contraproductive in term if Sq maybe too clean too digital. Maybe good for the Chinese BG Sin wave etc! Please your advice from which clock level to should not be needed from Prince to Eva? Will de-install to hear the original Sq again. Ps. Yes every change isn’t always an improvement. Very best regards,Andreas

I don't have that skill set. 1) I don't have that skill set. I am only capable to add ethernet-cables 😆 2) I have said several times that I have 2xNAA's ( Mini PC X64 and a Mac Mini) with your distros that partially work ( old X64 Mini PC) or not in combination with Auralic Vega 2.1 . 3) Correct summary but is saw that Chris C. Owner A_Style was using HQ-player on a Altair a few months ago. That was primary reason to give it a try. But I can add Chord and maybe another DAC a short notice which I can connect to analogue input of the Vega? But using again Direct Usb cable in terms of clean usb-signal was not intended. Will sent you a PM concerning what are the best NAA's in terms of SQ and regular software updates based on your experiences. Many thanks till so-far, Andreas

How can older X64 work properly? With same connection/cables switches and network. Not a very serious and stimulating approach from your side Jussi. Assuming that I don't have an internet connection or a cable connected! Have already spent so many hours on NAA Mac_Os X64 images that apparently work very differently or not. Please investigate if you yourself may have made a mistake. Instead instantly sliding everything back... which is very easy and not helpful at all.

Internet cable is in NOT KIDDING.

This naa-412-x64.7z isn't working on my X5-Z8350 HD. Pas. download took 1,5 hours! it hangs after starting please below screenshots of starting NAA. Network cable in. Chord Qutest connected by usb-cable. The same issue with latest NAA X64 drivers but the oder version of 2020 works ....HOW CAN?? 😳

No again much more

Only the naa-412-x64.7z' is updated not the Mac_Os ?

I cannot find at all? All dated 2020? or 23-02 2021or older

1) Last 3x Mac_Os Distrod not working properly with Auralic. And giving 16 bits PCM as NAA and 24bits** direct USB as result. Can switch to DSD with direct usb results in hick-ups/ plops and some music. As NAA no way to push with or without DoP DSD! But with Chord Qutest and latest MacOs it works fine. The X64 distro 2020 works also great with Auralic too. Strange what is that the difference in software between these versions? 2) & 4) NAA Mini PC W8 Pro Intel X5-Z8350 so far I am informed its runs windows10 or am I mistaken? I hardly it use as Windows pc. Will check it later if I am wrong or not. Y . I 'm not supporting Windows 8 with any of my recent software. Are you are saying that it's win8 mini-pc only? Fact is that only 411 and 4111 and 4112 on Intel X5-Z8350 not working properly. Both versions do start and generates a loop concerning drivers and constantly searching. These versions don't finish operation and find a usb-port or connection. Yes. I am using latest Big Sur version on all Mac mini's and HQ-player 4.11.0 3) Do you use same 4112 X64 image on UP-Gateway or the Windows version? **Had official reply from Auralic that in a MacOs environment the Auralic Vega G2.1 gives 24bits instead 32 bits as stated in their manual. That explains a lot!!! Ps. Can you steer / control a My UP-Gateway via a web- interface or a screen control form MacOs? I don't want to switch to Win10 at all! Regards, Andreas

Miska

Dear Jussy, After several checks /days / hours apparently your Mac-Os NAA images are not working properly in general Or specific for Auralic, which I very much doubt about because with another NAA Mini PC W8 Pro Intel X5-Z8350 2Gb/32GB the Auralic Vega 2.1 is working flawlessly. I can switch from PCM to SDM and back without any issues with Vega G2.1. Ps. I use distro 411 dated 22-03-2020. The only remark concerning Auralic is that it plays as 24 bits maximal bitrate in HQ-player and the Auralic app it shows as 32 bits playback? Finally, I am very glad that my Auralic is ok concerning its USB-input. Concerning my earlier post for NAA Mini PC W8 Pro Intel X5-Z8350 I have let you know that the newer distro versions of the X64 for intel X64 mini-PCs are not working as expected. Has this been fixed ? And do you have any idea how this is possible that earlier versions work on the same hardware and your new versions don't? Is that caused by your programming the newest distro? Ps. the latest Windows 10 version run on the same Mini PC without any problem? If I were to buy another Intel based PC / NUC for example the UP Board as recommended by you, would I have this same hassle concerning not working distros? Ps. Tried to download latest distro today but your download speed is very low I to about 1,5 hours for 260mb and will try it again on PC W8 Pro. Or no advisable? Ps. The dates are “ Back to the future “ isn’t it ... see below.😁 Best regards, Andreas

IMO avoid silver Level 2

That was my previous setting without assigning anything till today. Went back with no Vega assigned as default. Makes NO differences. All tried older 411 instead 412 X64 as NAA image. Same results. I cannot play DSD with or without DoP. NAA message start with defined 24 bits fro a 32 bits DAC? Than despite setting set to SDM as you see ....it forces back to 16 bits in NAA! Also tried version MacOs 410. NO result either. CoreAudio output device bits: 24 but immediately also 16 bits! I think something is wrong with my Auralic Vega 2.1 concerning the USB-input. Will be continued hopefully as soon as Auralic responses!