Amphenol DAC SFP Cable ADS1 for Audio Grade Network Switch (Group Buy for Audiophilestyle.com)

Amphenol DAC SFP Cable ADS1 for Audio Grade Network Switch (Group Buy for Audiophilestyle.com)

 

The Amphenol DAC SFP cable will improve the perfromance on data transfer. Since signal transfer is so sensitive to vibration on SFP module, vibration countermeasures are most effective to reduce jitter and improve sound quality.

 

This ADS1 DAC Cable is special industrial version for AfterDark. made from Amphenol for Audiophile.

 

The Amphenol DAC SFP Direct Attached Cable (DAC) Lan cable,  is well known and developed specifically for audio, taking a different approach from SFP optical cables which are "expected to cut noise from upstream" by focusing on the diversity of SFP. The Amphenol uses exotic copper wires for connection, and is designed to "connect SFP-compatible audio devices."

 

The ADS1 DAC Cable will improve the texture and details of the music and we like the dynamic and very natural and refined sounding. The improvements with Amphenol is immediately noticable during our listening experience when we develop this product , we recommended to mix with the use of Finisar SFP optical fiber to achieve the optimal sounding. 

 

Group Buy Purchase Link

 

Amphenol DAC SFP Cable ADS1 for Audio Grade Network Switch 

 

Audio Grade Quality Stamped EMI Ground Finger and the "T" Cable unlatching options with push-to-release 

 

 

Why Direct Attached Cable (DAC) is good for Audiophiles?

 

• A standard RJ45 cable comprises twisted pairs of cables that are accessed by a Bus interface called the PHY (Physical Layer). This is robust and reliable but not optimal for audio use. Twisted pairs are subject to impedance mismatch, speed restriction, pulse infidelity, crosstalk and external interference, all of which can be minimised by good engineering but not entirely negated.

 

• Th SFP Direct Attached Cable on the other hand, is constructed and designed to build with tighly controlled impedance, tested to manufacturing at 100 Ohms, without any impedance mismatch. As a result, the sound is much more natural and music is more musical. Most audiophile will hear the presentation is more transparent and alive sounding with much great space and air around everything, it’s not a subtle shift at all.

 

• The SFP completely bypasses the need for the PHY interface and allows for data stored on the music server with SFP NIC card to be accessed directly, with a commensurate decrease in data errors and loss, improving the sound quality of the overall signal.

 

• The DAC cable comprises of two twisted pairs of silver plated OFC Copper conductors rather than four in an RJ45 cable. The copper conductors is braided shielded twisted and each pair is individually screened and the entire cable is constructed with exacting precision to ensure that the technical benefits of the design are achieved in reality. This makes the ADS1 DAC cable with much higher bandwidth 14Gbps vs 10Gbps. 

 

• Low cross-talk and pair to pair skew with Amphenol SkewClear® Twinax Wire

 

• The benefits of improving the data integrity (often referred to as the ‘eye pattern’) is that the demands placed on the decoding hardware are reduced as less reinterpretation and reconstruction work is required, yielding further sound benefits in overall audio quality. 

 

• The DAC cable is designed to reflect the requirements of transmitting digital audio where stability and minimising errors are more important than out and out transmission rates. 

 

• The cable is used between AfterDark. NETone Switch or PA2 fitted with SFP sockets and the matching connections on the Buffalo BS-2016 SFP network switches, creating an ultra-high-quality link between the two devices that is almost wholly immune to outside interference.

 

• The SFP DAC Cable enables to supply the finest connectivity and interface between its components that far outweighs off the shelf alternative connectivity options, delivering performance that simply isn’t possible with less sophisticated network hardware. A plug-and-play solution, the  SFP DAC Cable can be used with most audio hardware equipped with SFP ports such as Aurender, HiFi Rose, Linn Klimax DSM, Taiko Audio SGM Extreme / Extreme switch, SFORZATO DSP-Columba, DSP-Corvus, DST-Lepus, UpTone EtherREGEN, Mirotik SFP Switch, Cisco SFP Switch, and Intel NIC. 

 

The signature blue protective cap for Amphenol DAC Cable

 

Group Buy Purchase Link

 

Method 1: 

 

 

 

 

Product details:

• Optimized for New NETone switch with built-in SFP optical bridge connected to a single clean output Ethernet
• Silver plated OFC copper conductors for excellent signal intergrity. 
• Audiophile grade Direct Attach Cable (DAC) for highest quality data trasfer
  • SFPs abstract the connection to the module to support a variety of cable formats, but direct attach cables directly connect SFP ports without conversion in the module. Compared to RJ-45, which needs to support a variety of connections, and optical fiber, which needs to perform optical encoding and decoding, there is no overhead processing, making it an extremely simple and straightforward configuration.
• The four internal cable conductors are made of silver-plated OFC copper solid wire. The structure is designed and built ultiizing a shielded twisted pair construction. 
• Low differential to common mode conversion
• Industry-leading within pair time delay skew
• Ultra low latency for Audio Applications
• Foam perimary insulation utilizes uniform, small cell structure for exceptional performance. 
• KARMET EMI Shielding material on the side of SFP connectors for extra shielding. 
• Heavy modified with tweaks for sound optimisation 

 

KARMET EMI Shielding material on the side on SFP connectors for extra shielding for Audio Application. 

 

 

 

Electrical Performance	100 Ohm Impedance Applications up to 14Gb/s per lane 14 Ghz clean performance
Cable Structure	Silver-plated AWG30 OFC solid wire
Connector Shape	Gold Plated SFP/SFP+ Module
Cable length	0.5M / 1.5M / 2.5M
Weight	Approx. 450-980g
Compatiable devices	All AfterDark. products includes PA1, PA5, PA6, S2 etc.   UpTone EtherREGEN  Buffalo GS2016  DELA S100, N1, N5, S10, S100/2  Cisco, HP enterprise Switch,   Linn KLIMAX DSM  SFORZATO DSP-Columba, DSP-Corvus, DST-Lepus  SOULNOTE Z-3, TAIKO AUDIO SGM Extreme / Extreme Switch
Transmission speed	1000Mbps / 10G