mikicasellas

Sorry, I meant 15.5 awg Regards

Hi Guys , Is this ANGELIQUE STRANDED size the equivalent to SOLID 15.5 mm For EPS, ATX and PSU ? https://www.hificollective.co.uk/catalog/wire/mundorf-acs1150bu-30-0-25mm-stranded-angelique-blue-wire.html

Hi Jussi, I think this will make a better idea of what im looking for in terms of configuring while using SDM in HQPOs If configuring in a different way any of those, specially the marked in RED When source is DSD64 : When Source is PCM :

.

My source is DSD64 already... What about DSD SOURCES settings, any advice on setting them for better results ? These are default ones

😃 I know ... it was just an example, a bad one for my side, thanks

Hello Jussi, These are exciting times, Thanks for the hardworking you have been doing ! I wonder if I kindly ask for some help here ... I want to try SDM with the best possible SDM settings and those ovals marked in RED (IF... ) for the best possible performance for my beloved SHM THE POLICE DSF DSD64 local albums . Could you show at least a possible scenario of those settings where for these music could squeeze the best possible sound ? for me they are well recorded, they could be amazing and don't want to ruin them with a regular to bad mix of settings . Thanks

...You got me spinning ! Do you and Nenon concur that stranded sounded better than solid ( in a nutshell ? ) Thank you Bro !

Bro ! What size do you suggest for each ? : -- ATX -- EPS -- PSU

I will try Thank you ! Thank You !

👌 🤝 Is there a direct way to put my music files on the OPTANE from the HQP OS ( USB stick ) ? Thanks ! Miguel

Hola Gato, Should I write those commands into the CONSOLE on HQP OS ( USB stick ) ? Thank you ! Miguel

Could the Noctua make the difference ?, what about vibration, isn't that something that can potentially affect sound quality ? Im launching HQPlayer from a USB stick, where should I : INSTALL / ADD those programs, I also have an Optane M.2 empty, Should I instal HQPos with the mentioned programs there ? Thanks !

Hi Miska, thank you ! I guess because my Audio Server is passive cooled it only goes until DSD256 with limited filters and cause I don't have a way to measure temperature , so for now im using PCM....Do you think i10-10700k will be powerful than the MM M2 ? No can do ...

Hello , @Miska Want to share my intentions and kindly ask All if you could throw your similar experience or possible suggestions , THANK YOU in advance ! Expecting my AppleMini M2 / 16 Gb / 8 cores / 10 GPU cores , to arrive any day now to replace my beloved old Mini -late 2012- . Nowadays , I use the old one as the HQPD remote for my audio server, which consists in the following : SERVER : - HDPLEX H5 Fanless Case - ASUS ROG MAXIMUS HERO XIII Z590 - Intel i7-10700K - TAIKO DC-ATX ( 24pin ATX to MoBo & 2 x 8pin to CPU ) - Apacer 2666 Industrial ( 8GB ) - Optane 58GB ( HQPOs -- ROON ) - Startech NIC PCIE card with Audio Note Cap replacing original - JCAT XE USB PCIE ( POWERED BY SOLA 5V ) These are my -so far- choices of change . other choices are very Welcome Adding a STREAMER ( +- 1500 - 2000 * ) selling TAIKO DC-ATX & JCAT XE USB PCIE Adding a STREAMER ( +- 1500 - 2000 * ) selling JCAT XE USB PCIE Replacing the actual server with MacMini M2 Thanks to All !