TRHH

What would be the best recording of "Sibelius - The Complete Symphonies"? THX Torben

From Germany (03.10.24 - Qobuz)

I have been using optical (SFP + CommScope TeraSPEED) for a long time. At the same time implementing at lot of elements to reduce/eliminate potential common mode noise. I than bought Amphenol SFP+ 10GbE direct attach passive copper cable (DAC) and did a comparison. I still enjoy the DAC cable.

So than we just need to buy a 10GbE+ switch and maybe an 10GbE+ FMC - depending on the setup - and we can see goodbye to noise. Interesting.

Have a look here: https://ethernet-sound.com/das-drosselkabel-minimierung-der-gleichtaktstoerungen-auf-dem-letzten-meter/

Have been there :-)

Yes, is the challenge

It seems to be worldwide (Germany): Bestimmte auf Qobuz verfügbare Werke könnten aus rechtlichen Gründen aus dem Service entfernt werden. Um unsere Verpflichtungen einzuhalten und den Schutz des geistigen Eigentums an der Musik zu gewährleisten, müssen wir unter bestimmten Umständen den Zugang zu bestimmten Titeln sowohl für den Download als auch für das Streaming einschränken. In diesen besonderen, wenn auch seltenen Fällen können ab dem Datum der Entfernung die Titel, die von den Kunden bereits im Qobuz-Store gekauft wurden, nicht mehr erneut heruntergeladen werden. Es sind keine Maßnahmen Ihrerseits erforderlich, aber wir empfehlen Ihnen, Ihre Musikeinkäufe immer so schnell wie möglich herunterzuladen und extern zu speichern. Wenn Sie unsere Dienste weiterhin nutzen, erklären Sie sich mit der automatischen Aktualisierung der neuen Bedingungen ab dem 1. Oktober 2024 einverstanden. Torben

Measurements clearly shows that is not the case. Torben

I use a Jack DC 12V and 5V supercapacitor filter: "This DC 12V jack filter with supercapacitor allows you to obtain a clean power supply for your Hi-Fi equipment and appliances, thanks to 5 supercapacitors 20F - 3.0V and an intelligent buffer system with common mode suppression effect. It also incorporates a UTC UZ1085L linear voltage regulator, an STC 8H1K08 microcontroller and a ME85P03 MOSFET transistor." https://www.audiophonics.fr/en/hifi-power-supply/jack-dc-12v-filter-p-18610.html Torben

@jabbr I don't think that I have any "common mode noise" problems in my setup anymore :-) And I don't have any plans to change the Amphenol SFP+ 10GbE direct attach passive copper cable (DAC) and I am not going back to fibre on the last mile. Torben

Absolutely not the case here! I will not go back Torben

THX @jabbr Have been looking at the product for specification FDBC125SD1Cxx but I can't find any information about "explicitly supports rates below 25G e.g. 10G,5G,2.5G and 1G". Can you help with a source? Torben

THX Alex Switch models that are MSA (Multi-Source Agreement) compliant typically accept uncoded modules. MSA compliance means that the switch can work with modules (DAC, AOC, SFP) from multiple vendors as long as those modules adhere to the MSA standards. This compliance ensures interoperability between different manufacturers' equipment. I just replaced my current switch with an unmanaged switch designed with Realtek RTL8382L chip so I don't have to worry about that problem anymore. Torben

Will EtherREGEN Gen2 comply with open-source SFF-8431 MSA standard? Have a nice WE Torben