Meridimac

Yes, DSP9 will accept an analog source (although I use AES/EBU). Yes, they are curvy and narrow around the drivers to minimize cabinet diffraction. Yes, with four DACs and 1,260 watts built-in, they are competitively priced considering the cost of truly excellent electronics. Meridian is confirmed as one the exhibitors at this year’s UK Audio Show on 5th/6th October, 2024, at Staverton Park Hotel & Golf Club, Daventry Road, Staverton, Daventry, Northampton, NN11 6JT along with Focal and others, but I don’t see KEF.

Me neither, although I’ve owned other KEF models in the past. I loved my bi-amped Snell Type A’s in the last century before I converted to active speakers: Meridian’s new DSP9 today, which I consider to be extremely transparent and neutral. And I’ve tweaked sources to the point where I don’t hear them anymore.

In the eye of the beholder: judicious use of DSP can eliminate passive crossovers and coax realistic, concert-level sound from cabinetry that my spouse will tolerate in the living room. Mine are basic black.

I very much enjoyed almost an hour with the Chronosonic XVX driven by D’Agostino with dCS source at a dealer in Manhattan before my new Meridian DSP9 active speakers were delivered. Even though much smaller and far less expensive, especially considering that the 1,260 Watts (each) are built in, they still manage to compete sonically with that Wilson design. All-In-One computer audio (just provide a quality source) has apparently advanced to the point where power, the operating system and innovative circuit design can directly address the drivers (eliminating passive crossovers) to present a lifelike, full-range 3D soundstage from 4’ tall floorstanders for less than $100k. -Not as impressive in a HR Giger way, but they fit my living room and budget.

I purchased the same Allo products and loved the sound from DietPi OS, but don’t use them today because of incompatibility issues between their old USB driver and newer Linux kernels. RoPieee has posted an OS image for this product which has an older kernel here.

deleted

Hello Ravi Add me to the list of faithful enthusiasts (DigiOne, original USBridge, Signatures, Shanti AND Nirvana!) who have been praying for updated drivers. We wish you much success.

I demoed BACCH4Mac last year, but decided against keeping it past the trial period because it was expensive, complicated to set up, and required a USB signal to run through my old laptop if I wouldn’t also buy a Mac Mini. -All too much for me at the time even though the system gave a surprising soundstage improvement within a very narrow listening position. I liked the effect for most recordings very much but, like you, I am back to the classic 60 degree triangle. HAF xtalk filtering in my standard setup is more general “reduction” for a broad sweet spot where you can sit any way you want, rather than total “cancellation” within a rigid, narrow space, -unless you pay $$ Theoretica for a head-tracking system. I also use the miniDSP USB microphone.

Thierry at homeaudiofidelity.com (HAF) also offers crosstalk cancellation versions of his excellent room correction filters, which are derived from your physical listening position measurements along with sweep file recordings using a calibrated mic. You can buy just the rc FIRs, pay a little more for additional filters with basic xtalk added (which is what I use), or opt for more customization to account for the shape of your head. I’ve been using HAF since 2018 in both a 7.1 theater and stereo setup, updating measurements (and filters) several times when changing speakers or significant acoustic elements/treatments. My most recent set was installed for new speakers a month ago -and this guy’s work just gets better and better IMHO. Highly recommended. Now that the hobby is abuzz about BACCH and XTC, the term “room correction” should also embrace efforts to deal with crosstalk distortion.

I am a new v3 user who wonders which rabbit holes to pursue now that my Kaby Lake i7-7567U CPU @ 3.50GHz NUC is happily running 1666 Hz 6.6.9-4-audiolinux-rt RT LTO with Diretta to a 8Gb Pi4 target. Other than implementing Diretta and isolating cores on the RPi, I’ve not messed with RAMROOT or any other configuration options yet because I’m scared of screwing up a good thing. My preference is to continue with Roon as player, but I miss the option to use UPnP, LMS or even AirPlay as I had with DietPi. Are they all compatible with Diretta, or compromise SQ when using Roon? Which configuration choices would you recommend?

Based on many recommendations here (Thanks!), I purchased two Finisar FTLX1475D3BTL from Mouser to implement a fiber segment ahead of my EtherREGEN -which I’m very happy with. I also bought a cheap 10GTek FMC with a decent 5v supply because those transceivers don’t work with my modified Cisco Catalyst 2960 switch. If l wanted to connect the Cisco SFP port to my Ubiquiti Edgerouter X SFP, would the Finisar FTLF1318P3BTL work with those older devices? Google hasn’t helped me answer this compatibility question, so I turn to the experts.

Yes, please. It would be helpful to gather current learnings here in order to create an up-to-date matrix of recommended settings. My goal is to share how we can fine tune AL V3 for optimum SQ.

No more trouble at my house, either, after another 30 hours.

This is the first morning when Roon wasn’t found dead from inactivity overnight, maybe because I upgraded to headless V3 kernel 6.6.9 yesterday. Since buying AL during the Christmas special I’ve had to leave a playlist running all night or disconnect power to reboot for music the next morning. Piero suggested that Roon goes to sleep after several hours which causes a crash, but it didn’t happen last night.